Service manual

OpenScape Business V1
Sales Information Page 10 04.06.2013
The base box has 9 slots, and the expansion box has 13 slots for peripheral boards.
The central control board OCCL has a fixed slot (slot 6, only in the base box).
Depending on your requirements, up to three LUNA2 power supply units can be used in the base
box and up to four in the expansion box (see the Service manual for details). LUNA2 supports
power supply and battery management functions. No other components are required if it is
operated as a power supply. To maintain short-term battery emergency operation after a power
failure, that is, to use uninterruptible power supply functions, you must also connect the
OpenScape Business Powerbox for each system box.
There are several options for connecting phones, CO trunks, etc. with OpenScape Business X8:
– SIVAPAC connectors are available on the backplane for connecting the external main
distribution frame MDFU-E or an external patch panel using CABLUs (prefabricated cabling
units).
– Connector panels with 24 RJ45 jacks for direct connection of telephones, trunks, etc. The
connector panels are clipped onto the SIVAPAC connectors on the backplane.
– For U.S. only: Connector panels with CHAMP jacks for connecting the external main
distribution frame MDFU-E or external patch panels using CABLUs. The connector panels are
clipped onto the SIVAPAC connectors on the backplane.
The type of connection used will be decided in consultation with the customer on conclusion of
the agreement. The system boxes will be delivered accordingly with or without clipped-on
connector panels.
Construction data
– Dimensions (height x width x depth): approx. 490 mm x 440 mm x 430 mm
– Height units for 19’’ rack-mount installation: 11
– Weight, including cabinet feet:
– Base box: approx. 16.5 kg
– Expansion box: approx. 15 kg
Ringer Equivalence Number (type plate)
– Base box:
– 6 A / 110 VAC
3 A / 230 VAC
– 50 - 60 Hz
– Expansion box:
– 8 A / 110 VAC
4 A / 230 VAC
– 50 - 60 Hz