Service manual

OpenScape Business V1
Sales Information Page 11 04.06.2013
1.2.8 Overview of Modules
All boards that can be ordered for OpenScape Business are listed below by their function.
A distinction is made between the following types of boards:
– Central boards
– Peripheral Boards
– Options
Refer to the topic Migration in the OpenScape V1 Business Administrator Documentation for
detailed information on the following boards:
– Boards Being Phased Out
These boards can no longer be ordered. However, they can still be used in the communication
systems of the OpenScape Business communication platform.
– Non-Supported Boards
These boards cannot be used in the OpenScape Business communication systems for
technical reasons.
These boards must be removed when migrating from HiPath 3000 to OpenScape Business
(see the chapter on Migration for details). If required, the respective follow-up board should be
used instead.
1.2.8.1 Central Board
All central boards that can be ordered for OpenScape Business are listed below.
INFO: Only the power supply units listed in the table below and those listed under Boards Being
Phased Out ensure the safe operation of all OpenScape Business communication systems. Any
power supply units not listed there must be replaced.
Board Part Number Used in Function
CMA S30807-
Q6931-X
X3R
X3W
X5R
X5W
Provisioning of ADPCM conversion and echo cancellation for DECT
Light (integrated cordless solution)
CUC S30777-Q750-
X
X5W Backplane
CUCR S30777-Q750-
Z
X5R Backplane
CUP S30777-Q751-
X
X3W Backplane
CUPR S30777-Q751-
Z
X3R Backplane
DBSAP S30807-
Q6722-X
X8 HDLC, PCM and clock signals are sent from the base box to the
expansion box.
LUNA2 S30122-
K7686-A1
X8 Power supply
OCAB
S2
S30807-
Q6950-X
X3R
X5R
X8
Provisioning of Unified Communications and Collaboration for the UC
Suite and ensuring that the requirements for the Open Directory
Service, OpenStage Gate View (with up to two cameras) and the
connection of external applications to the CSTA are met