Service manual
OpenScape Business V1
Sales Information Page 28 04.06.2013
With myPortal for Mobile, the UC client of OpenScape Business is controlled via a web
application in the web browser of the mobile phone. myPortal for Mobile provides access to
unified communications features such as the presence status, directories and journals. myPortal
for Mobile can be used on both pure GSM mobile phones and dual-mode phones. In order to use
myPortal for Mobile on GSM devices, a mobile phone contract with a data option (flat rate
recommended) is required.
Features of myPortal for Mobile
– Directories
– Favorites List
– Journal
– Presence status
– CallMe service (only with UC Suite
S2
)
– Voicemail
Dialing Methods in myPortal for Mobile
Mobile phone users can choose between different dialing methods for outbound calls.
– Callback
In the case of a callback, the mobile phone first sends a signal to the communication system
about the user's intention to call a specific destination number via a callback. After an
authorization check, the system first calls the mobile phone and then connects the destination
number. Consequently, call charges are not incurred for the mobile phone, but for the system.
– Call-through
In the case of a call-through, the mobile phone first sends a signal to the communication
system about the intention to make a call-through call and indicates the destination number.
Then, the mobile phone calls the DISA port of the system. After checking the caller ID (CLIP)
and the authorization, the system connects the destination number to be dialed with the
mobile phone. Consequently, no call charges are incurred for the mobile phone and possibly
for the system (i.e., depending on the dialed number). This dialing method mode is
recommended for mobile phone contracts with flat rate telephony tariffs.
– SIP
The call is set up via the 3
rd
party SIP client of the mobile phone.
– Associated dialing (only for tablet PCs)
Dialing is initiated from the tablet PC for a specific UP
0 or HFA device. The call is then
conducted at the UP
0 or HFA device.
Features in the Call State
– Consultation
– Alternate (Toggle/Connect)
– Conferencing
– Disconnect and return to held call