Service manual

OpenScape Business V1
Sales Information Page 29 04.06.2013
– Activate callback
– Enabling DTMF suffix dialing
1.3.5.2 Mobility Entry
Mobility Entry enables the integration of mobile phones.
Mobility Entry enables subscribers to control voice connections/features using DTMF after dialing
into the system. The communication system must support DISA for this. This provides
subscribers with access to certain system features via their mobile phones.
Dialing Methods for Mobility Entry
Mobile phone users can choose between different dialing methods for outbound calls.
Mobility Entry offers the following dialing methods:
– Callback
– Call Through
If a mobile phone subscriber at the communication system calls a special DID number with a
callback, the call is automatically terminated before the connection is established, and a callback
is executed immediately. After the callback, no further authorization is necessary. The mobile
phone subscriber can conduct internal and external calls and also use all Mobility features via the
communication system.
The prerequisites for a callback are as follows:
– The external number of the calling telephone must be registered and configured at the
communication system. If not, the call is disconnected, and no callback is executed.
– The DISA direct inward dialing number must be configured.
– The external number of the mobile phone subscriber is transmitted to the communication
system (CLIP information)
Features in a Dormant State
– Dial a number
– Program or delete call forwarding
– Activate or deactivate Do Not Disturb
– Send message
– Reset all services
– Activate or deactivate station number suppression (CLIR)
Features in the Call State
– Consultation
– Alternate (Toggle/Connect)
– Conferencing