Service manual

OpenScape Business V1
Sales Information Page 41 04.06.2013
Connecting TAPI 170 to Networked OpenScape Business Systems
For networked OpenScape Business systems, the TAPI 170 software is installed on one server,
which is connected via the LAN to the CSTA interface of the master node.
This connection is independent of the previously mentioned operating modes of the TAPI 170
Service Provider (remote TAPI or server-based connection).
To implement this connection, one CSTA link of the OpenScape Business master node as
well as one TAPI license for each configured TAPI station are required.
Note
Via the master node, the TAPI 170 receives network-wide access to all stations in the network.
If the TAPI 170 is connected to a slave node instead of the master node, TAPI 170 can access
only the stations of the slave node.
When using multiple TAPI 170 in a terminal server cluster, one CSTA link to the master node is
required for each TAPI 170.
IP
Corporate Network
CSTA Link
With „netwide view“
at Port 8800
Open Scape Business
Master Node
OpenScape Business
Slave Node
OpenScape Business
Slave Node
OpenScape Business S
Server with TAPI 170
TAPI 170
Figure: Connection of TAPI 170 to networked OpenScape Business systems
Capacities (Update Required)
The maximum number of TAPI 170 client PCs that can be connected to OpenScape Business
depends on the model. More information on this can be found in section
1.2.8.4.
Released Operating Systems
OpenScape Business TAPI 170 has been tested and released in combination with the following
operating systems.
– Microsoft Server 2008, 32 bit, 64 bit
– Microsoft Server 2008 R2, 64 bit
– Microsoft Server 2012, 64 bit
Note
The Microsoft Home Server and Microsoft Small Business Server variants are not supported.
Licensing
The use of OpenScape Business TAPI 170 is licensed on a subscriber basis. The licenses are
managed within the OpenScape Business systems.
When using the "MULAP" feature, a TAPI license is required for each station within the MULAP.
More information on licensing can be found in the section Error! Reference source not found. .