Service manual

OpenScape Business V1
Sales Information Page 70 04.06.2013
1.9.2.4 Scenario 4: Networking OpenScape Business V1 and HiPath 4000 V7
An internetwork of OpenScape Business X3/X5/X8 with HiPath 4000 can take different forms. On
the one hand, it can be implemented using direct addressing between the OpenScape Business
nodes (as in example 4a), and on the other hand, all connections could be routed via HiPath
4000 (as in example 4b).
Scenario 4a: Internetwork with HiPath 4000 and Direct Addressing Between the
OpenScape Business Nodes
Network Data
– Closed numbering within the OpenScape Business internetwork
– Network-wide voice and UC functionality within the OpenScape Business network (UC Suite);
configuration via the Networking wizard for the OpenScape Business network
– Configuring the HiPath 4000 network components in Expert mode
– The Small Remote Site (SRS) concept is not supported
– The UC functionality is optional; it is implemented either through the UC Booster Server or via
the UC Booster Card.
– OpenScape Business S can be integrated in single or multi-gateway mode.