Service manual

OpenScape Business V1
Sales Information Page 8 04.06.2013
– Slot level 3: slots for five options
The connection of telephones, CO trunks, etc., can be made directly at the boards or via an
external main distribution frame.
The back of the board frame has the UPSC-D, which integrates the functions of a power supply
and a battery manager. No further components are required for permanent AC power supply
operation. To maintain short-term battery emergency operation after a power failure, that is, to
use uninterruptible power supply functions, you must also connect the OpenScape Business
Powerbox.
Construction data
– Dimensions (height x width x depth): approx. 450 mm x 460 mm x 128 mm
– Weight: approx. 6 kg
Ringer Equivalence Number (type plate)
– 1.3 A / 115 - 230 VAC
– 50 - 60 Hz
1.2.5 OpenScape Business X5R
The OpenScape Business X5R is a communication system in a 19-inch rack mount case that can
be mounted in a 19-inch rack mount cabinet, as a standalone unit (desktop operation) or as a
wall-mounted unit.
OpenScape Business X5R has five slot levels, which are equipped as follows:
– Slot levels 1 through 3: each slot level provides slots for two peripheral boards
– Slot level 4: slot for the OCCMR mainboard
– Slot level 5: slots for three options
The front panel of the mainboard provides several RJ45 jacks for connecting telephones, trunks,
LAN switches, etc.
The UPSC-DR is located in the rear part of the 19'' rack housing. The UPSC-DR functions both
as a power supply and a battery manager. No further components are required for permanent AC
power supply operation. To maintain short-term battery emergency operation after a power
failure, that is, to use uninterruptible power supply functions, you must also connect the
OpenScape Business Powerbox.
Construction data
– Dimensions (height x width x depth): approx. 155 mm x 440 mm x 380 mm
– Height units 19’’ rack-mount installation: 4
– Weight: approx. 8 kg
Ringer Equivalence Number (type plate)
– 2.6 A / 115 - 230 VAC
– 50 - 60 Hz