Instruction manual

and briskly retract the bolt to its rearmost position. As the bolt nears the end
of its retraction, the chambered cartridge should be extracted and ejected.
When the bolt is fully retracted, push upward on bolt stop with thumb, then
allow bolt to move forward slowly until it comes to rest against the bolt stop.
Always visually double check the chamber and the interior area of the receiver
and the magazine-well to be certain there are no cartridges present. Gently
shake the pistol to dislodge any cartridge which may have been ejected into
the magazine-well when the bolt was retracted.
1
2
3
19
1
2
4
3
Safety “ON”
CORRECT UNLOADING SEQUENCE