Technical data

ManualsBrandsscope ManualsConsumer electronicsImpact Mk3

CONTENTS:

1. Safety............................................................................... 2

2. Daystate Owners Club................................................... 3

3. Filling your air rifle with compressed air ................... 3

4. Loading your rifle – Single Shot................................... 4

5. Loading the Daystate 10 shot magazine ...................... 5

6. Recommended Maintenance......................................... 6

7. Trigger Adjustment – Mechanical 2 stage trigger ..... 8

8. MK3 CDT(a) Battery Replacement ........................... 10

9. MK3 CDT(a) Electronic Trigger Unit...................... .11

10. MK3 CDT(b) Electronic Trigger Unit..................... 12

11. MK3 CDT(b) Programming & Operation.............. 13

12. CDT(b) Battery Charging......................................... 13

13. Gun Operation and Programming........................... 14

14. Technical data ............................................................ 19

15. Accessories for your Daystate rifle. ......................... 20

16. Pellet recommendations. ........................................... 23

17. CDT(b) Programming Quick Guide........................ 24

18.Telescopic Sight Fitting and Zeroing Instruction.... 26

19. Safe Shooting Ranges ................................................ 28

20. Daystate Warranty .................................................... 30

Safety:

• Never point your airgun at anyone or anything other than a

legitimate target.

• Always check that your airgun is not loaded when you first

pick it up.

• Always treat your airgun as if it was loaded, even if you

know it’s not.

• Never shoot on land where you do not have permission to

shoot.

• Always use a safe, large backstop to catch your pellets- and

pay due attention to what’s behind it, should you miss.

• Never leave your airgun unattended.

• Always store your airgun and pellets separately and

securely so that no unauthorised person can use them.

• Know and abide by the laws relating to airguns.

General information.

Congratulations on choosing a Daystate air rifle. Your rifle has

been made using the finest materials available and has been

precision made using CNC engineering technology. This rifle is

the culmination of Daystate’s involvement with pre-charged air

rifles and uses knowledge gained from manufacturing this type

of air rifle for nearly 30 years, making your Daystate one of the

most accurate and reliable rifles available today. The maximum

power output of your rifle has been factory set. In the UK It is

the owner’s responsibility to ensure that non-firearms licenced

rifles do not exceed the legal limit of 12ft./lbs. If you have to

leave your rifle for any length of time Daystate suggest that

some air is left in the reservoir, this will keep moisture at bay

Summary of content (16 pages)

PAGE 1
CONTENTS: Safety: • 1. Safety............................................................................... 2 2. Daystate Owners Club................................................... 3 legitimate target. • • 7. Trigger Adjustment – Mechanical 2 stage trigger ..... 8 8. MK3 CDT(a) Battery Replacement ........................... 10 9. MK3 CDT(a) Electronic Trigger Unit...................... .11 10. MK3 CDT(b) Electronic Trigger Unit.....................
PAGE 2
and help to maintain the integrity of the seals. Spare parts are available by contacting Daystate or your local agent and ordering the relevant parts. Daystate Owners Club The official owner’s club can be found on the Internet at: www.daystate.com. Log-on for all the latest information and news. WRITE YOUR RIFLE’S DETAILS HERE: 3) Fill to the charging pressure indicated on the side of the breech and then close the feed valve. Allow a few seconds for the pressure to ‘settle’ and then top up if required.
PAGE 3
*CDT (electronic) models. With the safety catch pushed up into the 'Fire' mode, a red light will illuminate. TO PREVENT DAMAGE TO THE RIFLING, ONLY USE SOFT METAL OR PLASTIC PELLETS Loading the Daystate 10 shot magazine. Note: The two countersunk screws located in the magazine housing must be in place and tightened when using the 10 shot magazine. Remember to keep the muzzle of the air rifle pointing in a safe direction at all times. 1) Apply the safety catch.
PAGE 4
Unregulated rifles: (Harrier X) Every 3 years Regulated rifles: (CR-X, Mk3 RT, MK3 FT) Every 2 years Reservoir: The steel under-barrel pressure chamber must always be kept in good order. Should damage occur i.e. denting, rusting, exposure to extremes of either heat or cold or any other blemish, it is advisable to return the gun for an inspection and pressure test.
PAGE 5
ALL TRIGGER ADJUSTMENT SCREWS HAVE A LOCKING SCREW. THIS MUST BE REMOVED BEFORE ANY ADUSTMENTS ARE MADE MK3 CDT(a) Battery Replacement. The MK3 CDT(a) is Powered by two disposable type 9 volt (PP3) Alkaline batteries, located in a recess in the fore-end of the stock. To replace these batteries, unscrew the stock-retaining bolt in front of the trigger guard, lift the air- tube to allow access to the battery compartment.
PAGE 6
MK3 CDT(a) Electronic Trigger Unit. MK3 CDT(b) Electronic Trigger Unit. Fitted to Mk3 CDT(a) rifles Note: It is not necessary to remove the rifle’s action from the stock to adjust the trigger. Fitted to CDT(b) type rifles Note: It is not necessary to remove the rifle’s action from the stock to adjust the trigger. Screw A: Adjusts the second stage weight setting. To increase the weight, turn the screw anti-clockwise. To lighten the weight, turn the screw clockwise. IMPORTANT.
PAGE 7
MK3 CDT(b) Programming & Operation. The Mk3's CDT(b) unit has many advanced features: When the 15V unregulated power adapter is plugged in the gun’s yellow light will flash every second to indicate charging. The safety switch should be in the safe position before charging.
PAGE 8
Resetting the magazine counter. 1) Ensure that the gun is unloaded and the safety switch is in the safe position. 2) Ensure the isolator switch is unlocked and the gun is pointed in a safe direction. Squeeze the trigger and then switch the safety switch to FIRE with the trigger still squeezed. A red light will be on. A single beep will be heard and the red light will blink once, release the trigger and the shot counter will be reset. The gun will be ready for firing. Shot Counter and Operation.
PAGE 9
switch the safety catch to FIRE with the trigger still pressed in. A red light will be on. 3) A single beep will be heard and the red light will blink once, keep the trigger squeezed so that there are 2, and 3 beeps and blinks given at 3 second periods, release the trigger when 3 beeps and blinks are noted. 4) When the trigger is squeezed the programming will toggle between normally on and off, one beep and blink for off, 2 beeps and blinks for on.
PAGE 10
1) Ensure that the gun is unloaded and the safety switch is in the safe position. 2) Squeeze the trigger while plugging the charging lead in and the yellow charging light will be illuminated. 3) Keep trigger depressed until 7 beeps are heard. Defaults have been restored: a) Magazine counter off b) Magazine counter set to zero c) Shot counter off d) Shot count set to zero e) Safety light normally on f) Power set to maximum Technical data.
PAGE 11
fits to the standard ½ inch UNF silencer thread fitted to the end of our Mk3 and Harrier X. Gloss or matt finish. Compact Silencer: The perfect addition to either the Harrier X or Daystate MKIII. Small and unobtrusive, this small unit delivers excellent sound reducing qualities and complements the rifle’s clean, sleek lines. MFC - Muzzle Flip Compensator: A series of thirty rear-facing holes considerably reduces barrel movement on firing, without destabilising the pellet.
PAGE 12
CDT(b) Programming Quick Guide: Pellet recommendations. Daystate rifles and 10 shot magazines have been engineered for longer pellets and may misalign or even jam if used with other shorter brands. The use of Crosman Accupell for example, may cause jamming and could invalidate the Daystate warranty. In the UK, unlicensed rifles must not be capable of producing power, with any projectile above the legal limit of 12 foot/pounds energy.
PAGE 13
STEP switch to safe, the shot count is now programmed Telescopic Rifle Sight Fitting and Zeroing Instructions: TURNING OFF THE SHOT COUNTER, STAGE 4 Items required: 1 Pull the trigger, then switch the safety switch to FIRE, a red light will be on 2 The gun will beep and the red light will blink 2) Sticky tape 3 Keep trigger pulled until 4 beeps / blinks are given after 9s 3) Spirit level 4 Release trigger and the gun is now in programming mode with the shot count reset to zero 5 Do not pull
PAGE 14
3) If the shot was lower than 5 inches then you will probably run out of adjustment on the elevation turret and it will be necessary to pack up the back of the scope. 4) Using the turrets on your scope, adjust until the centre of the crosshair and the pellet hole coincide. 5) Repeat stages 1-4 at your chosen zeroing distance. NOTE: Right Wrong The diagrams above show what the relationship between the sight and the barrel should be. 1) Place the gun vice or workmate on a firm and level surface.
PAGE 15
2) You can see clearly at least the maximum distance the pellet could travel; with no footpaths or public rights of way in the direction you intend to shoot. 3) There is no possibility of a person or pet entering your range while you are shooting. 4) If shooting in your garden, give consideration to your neighbours. Talk to them; explain what you are doing. Show them you are acting in a safe and responsible manner. Ensure that the target you are shooting at will not cause a ricochet.
PAGE 16
1st Service Stamp 2nd Service Stamp 3rd Service Stamp 4th Service Stamp 5th Service Stamp 6th Service Stamp 7th Service Stamp 8th Service Stamp 9th Service Stamp Warranty Registration Dealer Stamp Name: ……………………………………….. Address:………………...……………………. Post Code: …………… Telephone No: ……………………….……… Model: ……………………………………….