Technical data

17
switch the safety catch to FIRE with the trigger still
pressed in. A red light will be on.
3) A single beep will be heard and the red light will blink
once, keep the trigger squeezed so that there are 2, and 3
beeps and blinks given at 3 second periods, release the
trigger when 3 beeps and blinks are noted.
4) When the trigger is squeezed the programming will toggle
between normally on and off, one beep and blink for off, 2
beeps and blinks for on. When the required setting has
been selected, switch the safety switch to safe; the safety
light status is now programmed.
Switching The Magazine Counter On and Off.
The magazine counter can be disabled, for instance when the
gun is used with the loading tray instead of the magazine in
single shot mode.
1) Ensure that the gun is unloaded and the safety catch is in
the safe position.
2) Ensure the isolator switch is unlocked and the gun is
pointed in a safe direction. Pull the trigger and then switch
the safety catch to FIRE with the trigger still squeezed. A
red light will be on.
3) A single beep will be heard and the red LED will blink
once, keep the trigger depressed so that there are 2, 3, 4
and 5 beeps and blinks given at 3 second periods, release
the trigger when 5 beeps and blinks are noted.
4) When the trigger is squeezed the programming mode will
toggle between on and off, one beep and blink for off, 2
beeps and blinks for on. When the required setting has
been selected, switch the safety switch to safe; the
magazine counter status is now programmed.
18
Power Setting.
The user can adjust the muzzle velocity. The gun is supplied at
a maximum power setting depending on local legislation and
model type. The adjustment will allow the user to adjust the
gun to lower power levels for other applications in up to 16
steps (depending on calibre and power output). The number of
settings will depend on the rifles’ initial power output and
calibre.
Power Setting Programming.
1) Ensure that the gun is unloaded and the safety catch is in
the safe position.
2) Ensure the isolator switch is unlocked and the gun is
pointed in a safe direction. Squeeze the trigger and then
set the safety switch to FIRE with the trigger still
depressed. A red light will be on.
3) A single beep will be heard and the red light will blink
once, keep the trigger squeezed so that there are 2, 3, 4, 5
and 6 beeps and blinks given at 3 second periods. Release
the trigger when 6 beeps and blinks are noted.
4) The gun will now be set at maximum power; every time
the trigger is squeezed, the power will be reduced one step.
The size of each step will depend on the initial power
output of the rifle.
5) When the required power setting has been selected, switch
the safety catch to safe; the power setting is now
programmed.
Default Setting:
The user can set the gun to a default condition to switch off all
the features.