User manual

24
4.3 SECURING THE BCW OR HARNESS
1. Align the quick coupling's rail with holes on the
BCW or harness with the quick coupling pins on
the cylinder pack.
2
. Attach the BCW or harness in the cylinder pack
by moving the rail with holes into place against
the quick coupling's pins until it locks. Check that
the quick coupling has locked by pulling on the
BCW or harness.
4.4 SECURING THE BCW HOSE
1. Place the BCW inator hose between the rear of
the BCW unit and the cylinder pack. Allow the
BCW inator hose to pass through on the inside
of the BCW's inator connection.
2
. Thread the BCW inator hose through the eye
of the Velcro strip.
3
. Connect the BCW inator hose to the BCW con-
nection.