User`s manual

Schilling Marking Systems GmbH
In Grubenäcker 1 DE-78532 Tuttlingen
[phone] [phone]
[e-mail]
www.schilling-marking.de
MK3 - User’s Manual 22
Unpacking and installation
2.5.5 Pneumatic connection
Warning The pneumatic joint on the Marking unit is protected by a plug to avoid any solid
residues from entering into the pneumatic circuit that could compromise the
Marking operation. Remove the plug only when the pneumatic connection has to
be carried out.
Connect the air source to the input of Pneumatic Group; the air pressure must be not more than
6 bar.
Connect the Pneumatic Group output to the Marking Unit by means of the supplied tube.
To remove the tube, lower the ring of the adapter with the fingers
and pull out the tube.