User manual

SCPUHF Paging Transmitter System

SCPUHF Issue 2

Preface

Important Safety Information

Removal of covers from the equipment must only be undertaken by authorised service personnel,

who must ensure that power is isolated prior to removal.

Installation

Installation must only be undertaken by an Approved contractor, who shall ensure that all work is

carried out in compliance with IEE Wiring Regulations. For mains powered equipment, a readily

accessible isolating fuse or switched socket must be located within 1 metre of the equipment.

No User Serviceable Parts

Alteration or modification to any part of this equipment, without the prior written consent of the

manufacturer, will invalidate all Approvals and Warranties attaching to the equipment. Further liability

for the operation of the equipment, under the applicable law, will pass to the user, who will absolve

the manufacturer of any further responsibility for it’s correct operation and use.

This product complies with the essential requirements of the R&TTE Directive 1999/5/EC

Copies of the Declaration of Conformity covering this product can be obtained from Scope at

Quantum House, Steamer Quay, Totnes TQ9 5AL United Kingdom.

Do not discard. At end of life this equipment must be sent to an authorised waste treatment centre.

Contact Scope at the above address for further details.

********************************************************************************