Installation manual

Programming and Customizing Instructions

There are two types of programming mode:

1) Programming the Transceiver- To program the transceiver the MCM does not have to be

installed or be within range. The programmable modes for the Transceiver are:

• Transceiver Alert Type (Audible/Silent Vibrate).

• Clock.

2) Programming the MCM- To program the MCM the system must be installed, with in range, and

in the disarmed mode. The programmable modes for the MCM are:

• Auto/Manual Arming.

• Siren Tones and Siren Duration.

• Adjusting ADL202 Accelerometer (impact/shock sensor).

Entering Programming Mode

Follow the steps below to enter the programming mode:

NOTE:

Press button 3 to exit without

chan

the settin

or savin

4. Press button

1 to select

icon and to

begin

programming

1. Press button 4 twice to

enter programming

mode

3. Press button 4

repeatedly to

scroll though the

programmable

icons

1. Press Button 2 to

scroll between the

alert options

Alert options include: alert off, vibrate,

audible, vibrate and audible

Selecting Transceiver Alert Type (Audible/Silent/Vibrate)

1. Enter programming mode. The icon will begin to flash, press button #1 to select.

The LCD will display the current settings. To program follow these steps:

Note. At any time during programming press button # 3 to exit without saving and return to the

main screen

2. Available programmable

options will be displayed.

The selected icon will flash

2. Press button

4 to save and

exit