Service manual

SEAL PLATE INSTALLATION
\
1 1. Measure distance from seal mounting
)
}
/
plate surface on case to outer race of end
bearing on shaft. (Use depth micrometer).
2. Select and install correct end gasket
depending upon depth measurement as
follows:
Depth Measurement
.091 and over
.08 1 to .091
.080 and l ess
Gasket Thickness
.2 mm (.003")
.3 mm (.0 12")
.5 mm (.020")
3. Bolt seal plate in position.
4. Bend lock tabs to secure plate bolts.
FIG. 1-40
SERVICE MANUAL • 1975 SCORPION BRUT
SEAL
MOUNTING
SURFACE
FIG. 1-38
FIG. 1-39
FIG. 1-41
1- 19