Service manual

SERVICE MANUAL- 1975 SCORPION BRUT
4. With cylinders in place, place
inlet coolant manifold on cylin-
ders,
• Torque 6 mm nuts on manifold
to 5 Ft. lbs.
eTHEN
•Tighten torque 10 mm nuts on
cylinder studs securely to 25 Ft.
lbs.
5. Place heads on cylinders.
1- 22
• Locate outlet coolant manifold
on heads.
eTorque 6 mm manifold nuts to 5
Ft.
lbs.
• Torque 8 mm head nuts on
studs; torque to 20 Ft. lbs. (See
Specifications for torquing
sequence).
I
\
,, , ,, It , . .r
FIG. 1-44
CYLINDERS
INLET
MANIFOLD
)
HEAD NUTS
~ J
v
FIG. 1-45
OUTLET MANIFOLD