Service manual

(
(
DISASSEMBLY - ASSEMBLY
To perform maintenance, cleaning or repair
operation on the Mikuni Carburetor, use the
following procedure:
Remove the parts as indicated and place them
on a clean surface in the sequence removed .
MISCELLANEOUS
1. To drain the float bowl, remove the main jet
holder in the bottom of the bowl ( 14 mm
wrench).
2. Remove the jet from the jet holder (6 mm
wrench).
3. Remove Enriching Valve (Starter) Assembly
(12 mm wrench).
ENRICHING VALVE CYLINDER
ENRICHING
VALVE CAP
RETAINER SPRING
FIG. 2-13
SERVICE MANUAL - 197 5 SCORPION BRUT
MAIN JET
FIG. 2-12
MAIN JET
HOLDER
ENRICHING
VALVE CAP
FIG. 2-11
2-7