Service manual

(.
DRIVEN CLUTCH
REMOVAL
1. Remove screw and lock wa s her,
securing clutch to Jack Shaft.
2. Pull clutch off shaft.
DRIVEN CLUTCH
DISASSEMBLY
1. Wind the movable sheave against
the spring approximately 1/6
turn, and restrain it. Compress
cam top against clutch spring.
Slide cam in on stationary splined
hub until locking inserts clear the
(
cam top hub.
)
2. Remove locking inserts.
3. Allow cam top to move off the
splined stationary hub slowly.
Be careful, since the spring is un-
der both compression and wind
up, that the cam does not fly off
or rotate rapidly from spring wind
up.
4. All parts of driven clutch can
then be separated.
SERVICE MANUAL· 1975 SCORPION BRUT
SCREW
(SECURING CLUTCH TO JACK SHAFT)
STATIONARY SHEAVE
CAM TOP LOCKING INSERTS
SPRING
~
~ ' ~
,._
FIG. 4-18
MOVABLE SHEAVE
4-9