Service manual

SERVICE MANUAL· 1975 SCORPION BRUT
SLIDE SUSPENSION
1. loosen spring adjusting eyebolts.
Remove springs.
2. Remove cotter pin, castellated
nut and cross bolt. Pull shock
assembly out of slide assembly.
(See Fig. 5-6).
3. Additional disassembly of the
s lid e suspension may be ac-
complished by removing shafts
which hold the:
a. front idlers
b. rear idlers
c. front mounting weldment
(torque arm weldment)
FRONT IDLERS - ---r-----t
TORQUE ARM - -- :----~__,· 111
WELDMENT
EYEBOLT---- ----- ~
SUSPENSION SPRINGS --·- - - ---
REAR IDLERS----+ \·
5-6
J
FIG. 5-5
u