VLink II Cable Manual

http://www.scorpionsystem.com/files/download/CH341SER.zip
When you start this program for the rst time you are
shown this question box.
Running the Program
Please press the install button to proceed the installation.
After the installation is done, you are able to connect the
CH341 USB-Serial adapter to our program with our device
such as Commander V series ESC,
Tribunus series ESC, Vanguard serial ESC ...etc.
Click connect button to link up the ESC with the
program.
Click connection button to connect the ESC to the
program.
Scorpion V-link II Cable Manual
USB Adapter Installation
Before you start, install the Driver software for the CH341
USB-Serial hardware. If you have not downloaded the
software it can be found here:
When you have installed the software drivers, insert the
CH341 USB-Serial adapter into a free USB Port, the Driver
should now load correctly.
It if does not nd the drivers for some reason, please re-run
the driver installation.
v1.0