User's Manual

1. Primary mic location
2. Alternate mic location
3. Remote control location
4. Speaker box location
INSTALLATION CAUTIONS & WARNINgS:
BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding
electrical service (AIR BAGS, ABS BRAKES, ENGINE/BODY COMPUTER AND BATTERY).
PLAN OUT YOUR INSTALLATION. You should pre-determine the location of the
microphone, remote control andspeaker box. This will save time and ease the installation
process.
USE A VOLT/OHM METER: We recommend the use of a LED style test light or Volt/Ohm
meter to test and locate all connections. Test lights could possibly damage a vehicle’s
computer system or cause an airbag to deploy.
DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED with the brake/gas
pedals, steering column, or any other moving parts in the vehicle.
2
INSTALLATION OVERVIEW
FIgURE 1
7
OPERATION
mAKINg A CALL
Calls may be initiated from your mobile phone or directly from the BT1000 using voice-dial commands. Note:
Voice-dial feature must be supported by your mobile phone.
mAKINg CALLS FROm yOUR mOBILE PHONE
Dial directly from your mobile phone. The call is automatically connected to the BT1000.
RECEIVINg A CALL
The BT1000 will signal an incoming call with the announcement “Call from (Name or Number)”. Press the MFB
once on the BT1000 to answer the call.
ENDINg A CALL
During the call press the MFB to end the call. The BT1000 will announce “End call”.
REJECTINg A CALL
To reject an incoming call press and hold the MFB for 3 seconds The BT1000 will
announce “Reject call Successful”.
mAKINg A CALL USINg VOICE DIAL
Note: Make sure your mobile phone is voice-dial enabled. In Standby mode, short press the MFB. When you
hear a beep, say the voice tag. Important: Make sure to record a voice tag before using the voice-dial function.
This function is only applicable to mobile phones with Bluetooth Hands-Free Profile. Functionality varies
depending on the mobile phone model. Please refer to your mobile phone’s user guide for additional information.
LAST NUmBER RE-DIALINg
Press the “MFB” button twice to re-dialing the last number; The car kit announced” Redialing”.
TRANSFERRINg CALLS
Speakerphone to Mobile Phone - During a call, Short press “V+” and “V-” button and the call is routed to your
mobile phone.
Mobile Phone to Speakerphone - Press the “MFB” button once and the call is routed back to your mobile phone.
ADJUSTINg THE VOLUmE (ACTIVE CALL)
To Increase: Press the volume button “V+” to increase the volume by one level. Repeat until desired level is
reached.
To Decrease: Press the volume button “V-” to decrease the volume by one level. Repeat until desired level is
reached.
TEXT-TO-SPEECH VOLUmE (BT1000 CALLER ID ANNOUNCE)
To Increase: In standby mode press the volume button “V+” to increase the volume by one level. Repeat until
desired level is reached.
To Decrease: In standby mode press the volume button “V-” to decrease the volume by one level. Repeat until
desired level is reached.
ANSWERINg OR REJECTINg A SECOND CALL
To Answer: During a call with a second incoming call, short press the MFB to answer the second call and put
the first call on hold.
To Reject: During a call with a second incoming call, press the MFB for 3 seconds to reject the second call.
SWAPPINg CALLS
1. During a three-way call, press the MFB for 3 seconds to swap the call.
2. During a three-way call, short press the MFB to end the current call and automatically
switch to one of the other calls.
TEXT-TO-SPEECH LANgUAgE OPTIONS
Press and hold the “V+” button for 3 seconds and the BT1000 will announce “Select
language”. Repeat the process to select the desired language in the following order:
English, French, Italian, German & Spanish.