) CONNECTION 4. Connect the wiring of radian fo the INPUT wires of the FA! interface. “(See frustration A}. NOTE: The wire colors of your radio may differ from those on the FAL Consult your Stereo owner's manual lo match the wire functions correctly. Terminate all unused wires properly. 2. Connect the 14-Pin plug of the FAI harness to the OUTPUT of the FAI interface and connect the vehicle side of the harness to the Factory harness in the dash, (illustration A}. 3. Test sound system.
: LSAT] 1. Connect the wiring of radian to the INPUT wires of the FA! interface. “(See illustration A}. NOTE: The wire colors of your radio may differ from those on the FAL Consult your Stereo owner's manual lo match the wire functions correctly. Terminate all unused wires properly. 2. Connect the 14-Pin plug of the FAI harness to the OUTPUT of the FAl interface amid connect the vehicle side of the shames to the Factory harness in the dash. {illustration A}. 3. Test sound system.
correctly. Terming ts all arsed wires properly. 2 Connect the vehicle side of the shames 1 the Factory shames in the dash. (frustration A). ADJUST Ie 1 fad The FAI 14 interface is equipped with: output novel conic hat son be adagio or proper sound level matching. This is done by adjusting the gains of gate of the 4 channels through tha appropriate shall access holes on top of the Al-1As case. A very small Hat blade screwdriver 15 daiquiri $0 -perform the adjustments.
FAIRBANKS Supplement instruction CAUTION: Installation Noel Assimilate model Ford, Lineal, 3nd Mercury vehicles with a Factory Power (Motorized) antenna should have the solid BLUE wire in the £4 (standard) position of the GRAY power plug 23 I Is now.
