User manual

ManualsBrandsScosche ManualsMobile PhonesBFCL2

BFCL2K

HANDS-FREE BLUETOOTH

INTERFACE FOR

SELECT 2003-UP SELECT CLASS 2 GM VEHICLES

WITH XM SAT

TUNER

WITHOUT

XM SAT

BFEXTB

(EXTENSION)

APPLICATIONS HARNESS APPLICATIONS

iPhone is a trademark of Apple Inc., registered in the US and other countries.

CADILLAC

ESCALADE 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

ESCALADE ESV 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

ESCALADE EXT 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

CHEVROLET

AVALANCHE 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

COLORADO 2004-10 BFCL2XMB BFCL2HB NOT REQUIRED

CORVETTE 2006-08 BFCL2XMB BFCL2HB YES /XM ONLY

IMPALA/IMPALA SS 2003-05 BFCL2XMB BFCL2HB YES /XM ONLY

MONTE CARLO 2003-05 BFCL2XMB BFCL2HB YES /XM ONLY

SILVERADO CLASSIC 2007

SILVERADO NEW 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

SUBURBAN 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

TAHOE 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

TRAILBLAZER 2004-08 BFCL2XMB BFCL2HB NOT REQUIRED

UPLANDER 2005-07 BFCL2XMB BFCL2HB NOT REQUIRED

VENTURE 2003-05 BFCL2XMB BFCL2HB NOT REQUIRED

GMC

CANYON 2004-10 BFCL2XMB BFCL2HB NOT REQUIRED

ENVOY/XUV 2004-06 BFCL2XMB BFCL2HB NOT REQUIRED

SIERRA CLASSIC 2007 BFCL2XMB BFCL2HB NOT REQUIRED

SIERRA NEW 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

YUKON 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

YUKON XL 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

HUMMER

H2 2003-07 BFCL2XMB BFCL2HB NOT REQUIRED

H3 2006-07 BFCL2XMB BFCL2HB NOT REQUIRED

PONTIAC

MONTANA SV6 2005-06 BFCL2XMB BFCL2HB NOT REQUIRED

SI 02/10-BFCLK2 (3000533)

The Scosche BFCL2K BlueFusion

Bluetooth Interface will allow you to wireless-

ly communicate with your Bluetooth enabled celular phone and Stereo Bluetooth

transmitters. The BFCL2K communicates directly with your factory radio allowing

you direct control of hands-free, voice dialing, and A2DP functionality. These in-

terfaces maintain the original integrity of important diagnostic and safety systems

within the vehicle. For up-to-date applications or any Technical asistance with this

product, call Scosche Tech support at (800) 621-3695 Ext 3.

Summary of content (12 pages)

PAGE 1
BFCL2K HANDS-FREE BLUETOOTH ® INTERFACE FOR SELECT 2003-UP SELECT CLASS 2 GM VEHICLES The Scosche BFCL2K BlueFusionTM Bluetooth Interface will allow you to wirelessly communicate with your Bluetooth enabled celular phone and Stereo Bluetooth transmitters. The BFCL2K communicates directly with your factory radio allowing you direct control of hands-free, voice dialing, and A2DP functionality. These interfaces maintain the original integrity of important diagnostic and safety systems within the vehicle.
PAGE 2
IMPORTANT CELL PHONE DISCLAIMER: READ FIRST! • Some cellular phone manufacturers utilize a Bluetooth microprocessor that unfortunately is not compatible with the BlueFusion system. Some phones from Palm, LG (Envy/Envy2), Samsung (Impression) and HTC (Omni) have exhibited operating difficulties with the BlueFusion system. If you own these models or other models from these manufacturers call Scosche Tech Support for the latest updated phone incompatibility list. (800) 621-3695.
PAGE 3
VEHICLES WITH SAT TUNER IMPORTANT NOTE: If vehicle is equipped with XM tuner box (active or not active) the BFGMLANXMB harness must be used. The BFGMLANXMB “T” harness must be installed at the SAT radio Tuner box location. XM TUNER LOCATIONS: Trucks/SUVs: Behind Glove box, Crossovers: Left rear side panel, Sedans: Trunk. TECH TIP: Do not mount the BFCL2 module near moving or mechanical devices that may damage the interface.
PAGE 4
VEHICLES WITH REAR SAT TUNER IMPORTANT NOTE: BFEXTB extension is required on vehicles that have their SAT Tuners located at the rear of the vehicle. BFETXB is sold separately (Not included) (Impala, Monte Carlo). TECH TIP: Do not route BFEXTB extension cable over sharp edges or near moving parts. MICROPHONE TRUNK MOUNTED XM TUNER BOX 10ft. EXTENSION 3-PIN 24-Pin XM HARNESS BFEXT INSTALLATION: 1. Locate XM tuner box in vehicle. 2. Remove XM harness from XM tuner. 3.
PAGE 5
PAIRING YOUR CELLULAR PHONE IMPORTANT NOTE: Your Bluetooth cellular phone must be paired with the BlueFusion system before use. Once the initial pairing process has been copleted, your phone should easily connect and disconnect to BlueFusion during daily use. PAIRING INSTRUCTIONS: 1. Once the hardware has been properly installed, insert the key and start the vehicle. The BlueFusion interface needs to read the vehicle’s ignition codes to properly initialize. 2.
PAGE 6
USING THE RADIO CONTROLS TUNE DISPL SEEK SEEK Multi-Function Knob These are the only buttons used for the interface. Seek Forward Please read and understand this entire manual before operating the interface. TO SCROLL MENUS TO ANSWER/ SELECT Seek Back TO END/ PREVIOUS MENU USING THE STEERING WHEEL CONTROLS All other buttons on the steering wheel controls are defaulted to send the conversation to switch back to privacy mode (back to the cellular phone).
PAGE 7
SWITCHING BETWEEN SOURCES Your BlueFusion system functions as an XM source through your Factory Stereo. In order to access BlueFusion, the XM band must be selected (See diagram). If listening to a source other than XM, BlueFusion will automatically switch to the XM band when there is an incoming call. (See note) When the call is ended your radio may not switch back to the previous source unless the previous source was XM.
PAGE 8
HANDS-FREE OPERATION HANDS-FREE OPERATION INCOMING CALLS: When receiving an incoming call the Factory radio will automatically switch to the BlueFusion source and display caller number. The BlueFusion system is designed to display caller ID only. (Some phones may provide additional message string information and provide a name in place of the calling number. Your results may vary). BlueFusion does not support Phonebook profile. TO ANSWER A CALL: Press Seek Forward on the steering wheel controls.
PAGE 9
SECONDARY AND CONFERENCE CALL HANDLING When receiving a second call while in an active call the BlueFusion display a new menu with a list of second call handling functions. TO ANSWER THE SECOND CALL AND PLACE ACTIVE CALL ON HOLD: Press Seek forward on radio. Press Seek forward on Steering Wheel Control. SWAP CALLS: (This option is only present during TWO active phone calls) Scroll to “Swap Calls” in BlueFusion’s second call menu and press seek forward once.
PAGE 10
A2DP/AVRCP STREAMING AUDIO A2DP STREAMING AUDIO/ AVRCP REMOTE CONTROLS Important Cell Phone Disclaimer: READ FIRST! BlueFusion will support audio streaming while it is paired with a cell phone (whether this is within the same device supporting multiple profiles or two separate device). -While streaming A2DP, redial and voice dial functions are DISABLED.
PAGE 11
TROUBLE SHOOTING For all issues take the following steps first before moving on to any other trouble shooting. This process insures complete initialization. 1) Turn off vehicle 2) Unplug interface, 3) Enter vehicle and close all doors 4) Wait until the vehicle computer enters “Sleep” Hibernation. (After approx. 3 min. Listen for click sound in thee doors). 5) Without opening doors, plug in interface 6) Start engine. Unit has been installed properly but BlueFusion screen does not display.
PAGE 12
FCC This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) this device must accept any interference that may be received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modification could void the user’s authority to operate the equipment.