Owner's Manual
SCCJSCI-IE"
CR1292B
IN-DASH INSTALLATION KIT FOR
2007-UP
DODGE SPRINTER
6390
SINGLE DIN
TRIM RING
INTRODUCTION I PRELIMINARY
Thank you for purchasing the Scosche CR1292B Kit. This kit was manufactured with the highest of
quality standards.
CAUTION: DISCONNECT YOUR VEHICLE'S NEGATIVE BATTERY TERMINAL BEFORE THE
INSTALLATION TO HELP PREVENT ELECTRICAL DAMAGE. WE RECOMMEND THE USE OF A
VOLT/OHM METER OVER A TEST LIGHT TO CHECK WIRING. A TEST LIGHT OR GROUNDED
WIRE PROBE CAN CAUSE DAMAGE TO THE VEHICLE'S COMPUTER AND/OR DIAGNOSTIC
SYSTEMS. AVOID ALL FACTORY AIRBAG WIRING - AIRBAGS CAN ACCIDENTALLY DEPLOY
CAUSING SERIOUS INJURY
OR
DEATH.
NOTES:
•
See
your vehicle's instructions for any special tools your installation might require.
•
Read
all
instructions accompanying your car stereo/cassette player for proper wiring and mounting
instructions.
FACTORY WIRING CODES
For Factory Wiring Codes go to: WWW.scosche-cars.com
CAR STEREO CONNECTIONS
PROVIDE
EASY
CONNECTION
OF
YOUR
CAR
STEREO
TO
FACTORY
WIRING
HARNESS.
VW03B
2002-Up
Volk-
swagen
&
BMW
VWA3B
VW/European
Antenna
Adapter
LIABILITY DISCl::AIMER
This instruction booklet
is
based
on
carefully documented data and research of automobile dash disassembly. wire
harness/codes and information pertaining to installation of this kit (CR1292B)
in
2007-Up Dodge Sprinter Vehicles.
Scosche Industries, Inc. can not be held responsible for discrepancies/inconsistencies that may occur due to the
automobile manufacturing changes or
Opti011S.
or damage that may occur
in
the automobile during the installation of
components while using this booklet.
If you have any further questions, call our toll free technical help line at:
1-800-621-3695x3
© 2007 SCOSCHE INDUSTRIES, INC.
SI
7/07 - CR1292B (3000003)