Owner's Manual
Table Of Contents
CLIMATE
&
CONVENIENCE CONTROLS
Figure
5
9
I
1 -
-MAX(l
3
4
1 .
Max
AC
2.
F
an
Speed
Indica
tor
3.
Vent
Air
Dir
ec
tion
4.
Dr
iver
Hea
ted
Seat
5.
Pass.
He
ated
Seats
10
5
6.
Temp
.
Warm
7.
Temp.
Indicator
8.
Temp.
Cool
9.
Outside
Temp
.
Reading
10.
Time
- 6
8
TEMPERATURE
CONTROL
Usc the
UP
and DOWN
arrows (Fig.
5.
#6
&
#8) on the color TFT touch screen to adjust vehicle air
temperature. Touch the Red
<Up>
arrow
to
increase air temp. Touch the Blue <Down> arrow
to
decrease
air temp. The temperature ind1cator will move up
or
down
indicating the current temperature leve
l.
The
temperature range is color-coded: Red indicates warmer
ai
r and Blue indicates cooler
air.
AIR FLOW
I
VENT
CONTROL
Touch the vent control mode
1con
(F1g.
5,
#3)
on the color TFT touch screen
to
toggle through the current
vent mode. Graphics are displayed according to the selected vent and airflow pattern.
-..,.
•
Ar
IS
directed
-....
•
Air is directed
• .
Air is
9.
A1r
will
be
,
to
the instrument
~
to
the instrument
,
directed directed
to
the
panel
vent
out:ets.
'--
panel outlets and
"-
to
the
floor
-1
windshield and
~
the
floor ventoutlets.
~
vent outlets
"_,-
floor
and/or side
Q
A1rwillbe
• directed
to
the
-1
front and
rear.
,-
windows only
CillJ
A1r
will
be directed
-....
•
to
the Instrument
--1
panel vents and
,-
rear
window
MAX:¢:
vent
outlets.
See
Below for
more detail on
this setting
Q •
ll'd1cat•on
light
w
II
''
"'''•na
on
phys•cal
button
and
touch
scrprm
Windows
only.
r;;;-,
• lnd•cat1on
l
ight
will
r;:-;l
•
lnd1ca'•on
light
w.li llium•nat'!
only
~
on Phys•ca'
UAC
button
~
1llum•nate oPiy
on
Physical
UAC
but~on
MAX¢
MAX
AJC
button (Fig.
5,
#1)
on the color TFT touch screen to turn on Max
NC.
Maximum
cool ng will occur with the tempe
ra
ture is adjusted
to
lowest cold
setting
and the Fan speed is
set at maximum. MAX
NC
IS
used to cool the car
down
as quickly as possible. Touch the Max
NC
button again
to return to the previous Fan speed and temp setting.
DRIVER
AND PASSENGER HEATED
SEATS
Touch the
driver's
seal heater button ( Fig.
5,
#4)
on the color TFT touch screen to turn on
the driver's seat heater. The engine must be running
to
use heated seats. A Button graphic
will
show
the level
of
heat selected (low, medium,
or
high). Press the button repeatedly to
cycle through the temperature settings or to turn the heated seat
OFF.
Touch the passenger's seat heater button (Fig.
5,
#5)
on the color TFT touch screen
to
turn on the
Passenger's seat heater. The engine must be running
to
use heated seats. A button graphic will show the
level
of
heat selected (low, medium.
or
high). Press the button repeatedly
to
cycle through the temperature
settings
or
to
turn
the
heated seat
OFF.
©
?.0
16
SCOSCHE INDUSTRiES. INC.
12
FD62108
12/16