Owner's Manual

INSTALLATION GUIDE Disassembly
Remove the four screws securing the
OEM panel to the dash; then unplug and
remove the panel (See image on right
side).
Remove the OEM Display and the CD receiver
by unscrewing the four screws
for each
component (8 screws total, circled); then
unplug all wiring and remove (See image on
the left).
INSTALLATION GUIDE Assembly I Mounting
IHIIIIIII Major modifications required &
CAUTION for double DIN installation. f
~~~~~ Proceed with CAUTION! •
Step7
Prcpa rallon
Carefully cut and remove the
highlighted dashed area on
the sub-dash frame to create
space for the double DIN
radio.
File down the slight ridge
areas highlighted and noted
on right picture.
NOTE: Only file down
necessary amount to give
the U.A. C. a flush fit.
© 2016 SCOSCHE INDUSTRIES, IN C.
3
FD621 08 12/16