Owner's Manual
Table Of Contents
- Installation Instructions
- Kit Components
- Factory Stereo Removal
- Kit Assembly / Installation
- Wiring Diagram
- Vehicle Startup (Initialization Procedure)
- Initial Vehicle / Options Setup
- Climate & Convenience Controls
- Display Screen Settings
- Vehicle Feature / Settings
- Steering Wheel Controls
- To Ensure Proper Functionality, Cycle the Ignition Key from "Off" to "Run" TWO times (2X) after First Connecting the Interface
PARTS LIST
1. Main panel with built-in touch screen
(*)
2. Stereo mounting bracket
Oeft)
3.
Stereo mounting bracket (right)
4.
Dash pocket
for
single din mount
5.
Power harness (not shown-see page
3)
SOLD
SEPARATELY:
CAMOSM OnStar retention interface (not shown -see page
4)
2
3
4
FACTORY STEREO REMOVAL
2013-UP
CHEVROLET MALIBU
1. Use a panel remove tool (PRl)
To
unclip and remove shifter bezel.
2. Use a
PRT
to
unclip and remove behind key cylinder.
3.
Use a
PRT
to
unclip and remove panel above glove box.
4.
Use a
PRT
to
unclip and remove silver trim around radio.
5.
Extract
(4)
7mm screws, unplug and remove hazard switch panel.
6.
Extract
(2)
7mm screws, unplug and remove
NC
Panel.
7.
Extract
(2)
7mm screws, unplug and remove radio panel.
8.
Extract
(4)
7mm screws, unplug and remove radio
2