Owner's Manual
Table Of Contents
- Installation Instructions
- Kit Components
- Factory Stereo Removal
- Kit Assembly / Installation
- Wiring Diagram
- Vehicle Startup (Initialization Procedure)
- Initial Vehicle / Options Setup
- Climate & Convenience Controls
- Display Screen Settings
- Vehicle Feature / Settings
- Steering Wheel Controls
- To Ensure Proper Functionality, Cycle the Ignition Key from "Off" to "Run" TWO times (2X) after First Connecting the Interface
INITIAL VEHICLE I OPTIONS
SETUP
IMPORTANT NOTE:
To
ensure
proper
operation
of
the
touch-screen climate control,
you
must
first
set
the
unit
to
match
your
vehicle model, HVAC controls
and
factory-equipped options.
Follow
the
steps
below
after
you
have
connected
the
UAC
and
completed
the
initial
power
up
stage
by
cycling
the
Ignition
key
from OFF to ON/RUN Two times (2X).
1. Press the power button (page
6,
Fig. 3,
#4)
to
power on the touch screen controls.
2. Press and Hold the SET button (page 6, Fig.
3,
#8)
for
10
seconds
to
access the Car Selection Screen
(Figure 1 below).
3. Touch the vehicle model and A/C control option that corresponds
to
your particular vehicle. White colored
text
will highlight
to
RED
indicating your selection. (Do not select Camaro).
FIGURE 1
car
Selection Screen
1 . BACK button 2. Model selection
4. Upon choosing a vehicle, the touch-screen will immediately display a list
of
factory options (Fig. 2, below).
5. Touch
to
select each feature that matches the options for your particular vehicle (Fig. 2,
#2).
White
text
will highlight
in
Green indicating that feature has been turned on. To deactivate simply touch again.
NOTE: Options vary
by
vehicle trim level and equipment. For example, "Remote Start", "Reverse Tilt
Mirror", etc.
If
you are unsure
of
the options on your vehicle consult your dealer invoice
or
the vehicle's
original owner's manual.
6. Use the scroll down arrow (Fig. 2,
#3)
to
access ALL options as there are may be more that what is listed
on
the first screen.
7. Once the appropriate options are selected (highlighted as Green text), exit setup screens
by
pressing the
back arrow (Fig. 2, #1) in the
top
left corner until you get
back
to
the home screen.
FIGURE 2 Feature Selection Screen
TIPS:
1. BACK button 2. Options list
3. Scroll down button
• You may repeat the setup steps above as needed
to
configure options
for
your vehicle.
• Vehicle selections are highlighted in
RED
text
and and feature selections are highlighted
in
GREEN
text.
•
If
you select
an
incorrect feature
or
screen configuration such as Dual climate
for
a Single climate vehicle,
touch screen functionality will be impaired. PLease choose
the
correct features that match your original
vehicle confuguration.
If
you need further asssistance, call, email
or
live chat with a Scosche tech support
representative:
(BOO)
621-3695
Ext.
3
or
techsupport@scosche.com.
•
If
you find accessing the feature lists and icons
of
the touch-screen difficult, you may use the same type
of
soft-tip stylus that's compatible with most portable devices such as tablets computers and smart phones.
• Do not select Camaro on the Car Selection screen.
5