Owner's Manual
Table Of Contents
- Installation Instructions
- Kit Components
- Factory Stereo Removal
- Kit Assembly / Installation
- Wiring Diagram
- Vehicle Startup (Initialization Procedure)
- Initial Vehicle / Options Setup
- Climate & Convenience Controls
- Display Screen Settings
- Vehicle Feature / Settings
- Steering Wheel Controls
- To Ensure Proper Functionality, Cycle the Ignition Key from "Off" to "Run" TWO times (2X) after First Connecting the Interface
CLIMATE & CONVENIENCE CONTROLS
FIGURE 4
Home TFT Color Touch Screen layout (SINGLE Climate Control System)
1. Air Temp
Up
2.
Air Temp Down
Temp
3.
Max A/C On/Off
range
4. Vent Mode
5.
Fan Speed
Indicator
TOUCH SCREEN CONTROLS - SINGLE CLIMATE CONTROL SYSTEM
TEMPERATURE CONTROL
Use the UP and DOWN arrows (Fig. 4,
#1
&
#2)
on the color TFT touch screen
to
adjust vehicle air
temperature. Touch the Red <Up> arrow
to
increase air temp. Touch the Blue <Down> arrow
to
decrease
air temp. The temperature indicator will move up
or
down indicating the current temperature level. The
temperature range is color-coded: Red indicates warmer air and Blue indicates cooler
air.
AIR FLOW I VENT CONTROL
Touch the vent control mode icon (Fig.
4,
#4)
on the color TFT touch screen
to
toggle through the current
vent mode. Graphics are displayed according
to
the selected vent and airflow pattern.
Air is directed
to
the
instrument panel vent
outlets.
Air is directed
to
the floor vent
outlets.
• Air is directed
to
the
...
instrument panel
L
_.
~
outlets and the floor
Air will be directed
to
the windshield
and floor and/or
side vent outlets.
lllllll
_,..,
vent outlets.
MAX*
AIR CONDITIONING
To
turn the air conditioning
ON
or
OFF press A/C button on the control panel (pg.
6,
Fig.
3,
#3).
A Blue indicator light turns on. If the fan is turned off
or
the outside temperature falls below
freezing, the air conditioning will not work. The air conditioning might automatically come on
when Defrost mode is selected.
Touch the MAX A/C button
(Fig.
4,
#3)
on the color TFT touch screen to turn on Max A/C.
Maximum cooling will occur with the temperature is adjusted to lowest cold setting and the
Fan
speed is set at maximum. MAX A/C is used to cool the car down as quickly as possible. Touch
the Max A/C button again to return to the previous
Fan
speed and temp setting.
Touch the Re-circulate button (pg.
6,
Fig.
3,
#7)
on the color TFT touch screen
to
turn on
recirculation. Air will be re-circulated inside the vehicle. This mode helps
to
quickly cool the air
inside the vehicle
or
prevent outside air and odors from entering. Operating recirculation mode
while the
A/C
is off increases humidity and may cause the windows
to
fog. Recirculation is not
available
in
the Defrost
or
Defog modes.
FAN
SPEED INDICATOR
Graphic indicator shows fan speed level (Fig
4,
#5). See "Fan Speed Control" on page
6.
7