Owner's Manual

CLIMATE & CONVENIENCE CONTROLS
FIGURE 5 Home TFT Color Touch Screen layout (DUAL Climate Control system)
1. Driver's Temp Indicator
2. Driver's Temp Up
3. Driver's Temp Down
4. Max
A/C On/Off
5. Driver's Heated Seat
6. Auto Climate Control
7. Fan Speed Indicator
8. Passenger's Heated Seat
9. SYNC {Driver/
Passenger Temp)
1 0. Passenger's Temp Down
11. Passenger's Temp
Up
12. Passenger's Temp Indicator
13. Vent Mode
TOUCH SCREEN CONTROLS - DUAL CLIMATE CONTROL SYSTEM
DRIVER'S TEMPERATURE CONTROL
Use the UP and DOWN arrows (Fig. 5, #2 & #3) on the color TFT touch screen to adjust vehicle air
temperature. Touch
the Red <Up> arrow to increase air temp. Touch the Blue <Down> arrow to decrease air
temp. The temperature indicator will move
up or down indicating the current temperature level (Fig 5, #1). The
temperature range is color-coded: Red indicates warmer air and Blue indicates cooler air.
PASSENGER'S TEMPERATURE CONTROL
Use the UP and DOWN arrows (Fig. 5, #11 & #1 0) on the color TFT touch screen to adjust vehicle air
temperature. Touch the Red <Up> arrow to increase air temp. Touch the Blue <Down> arrow to decrease air
temp. The temperature indicator will move
up or down indicating the current temperature level (Fig 5, #12).
The temperature range
is color-coded: Red indicates warmer air and Blue indicates cooler air.
SYNC
Press the SYNC button on the touchscreen (Fig. 5, #9) to synchronize the Passenger temp control to the
Driver's side.
An indicator light in the touchscreen button will illuminate when the controls are in SYNC mode.
Press again
to deactivate and allow independent Driver and Passenger temp settings.
AUTO CLIMATE CONTROL
Press the AUTO button on the touchscreen to allow the HVAC system of the vehicle to automatically
regulate warm and cool air
to maintain the desired temperature chosen by the user. An indicator light in the
touchscreen button will illuminate when control is in Automatic mode. Press again
to deactivate and allow
manually-controlled temperatures.
AIR FLOW I VENT CONTROL
Touch the vent control mode icon (Fig. 5, #13) on the color TFT touch screen to toggle through the current
vent mode. Graphics are displayed according
to the selected vent and airflow pattern.
-. • Air is directed
- ~ to the instrument
_,- panel vent outlets.
AIR CONDITIONING
• Air is directed
-. ~ to the instrument
,-._._ panel outlets and
... the floor ventoutlets.
e Airis
~ directed
.... ,_.to the floor
vent outlets
~. Airwillbe
directed to the
~ windshield and
...,_ floor and/or si de
vent outlets.
To turn the air conditioning ON or OFF press A/C button on the control panel (pg. 6, Fig. 3, #3). A Blue
indicator light turns on. If the fan
is turned off or the outside temperature falls below freezing, the air
conditioning will
not work. The air conditioning might automatically come on when Defrost mode is selected.
Touch the MAX
A/C button on the color TFT touch screen (Fig. 5, #4) to turn on Max A/C. Maximum cooling will
occur with the temperature is adjusted
to lowest cold setting and the Fan speed is set at maximum. MAX A/C is
used
to cool the car down as quickly as possible. Touch the Max A/C button again to return to the previous Fan
speed and temp setting.
Touch the Re-circulate button on the control panel (pg. 6, Fig. 3,
#7) to turn on recirculation. Air will be re-
circulated inside the vehicle. This mode helps
to quickly cool the air inside the vehicle or prevent outside air
and odors from entering. Operating recirculation mode while the AIC is off increases humidity and may cause
the
windows to fog. Recirculation is not available in the Defrost or Defog modes.
FAN SPEED INDICATOR
Graphic indicator shows fan speed level (Fig 5, #7). See "Fan Speed Control" on page 6.
cont'd on page 9
8