Owner's Manual

FACTORY WIRING CODES
For Factory Wiring Codes go to: www.scosche-cars.com
PROVIDE EASY CONNECnON OF YOUR CAR
STEREO
TO FACTORY WIRING HARNESS.
HA08B
199B-Up Honda
Harness
HAAB
2005 -Up Honda
Antenna Adapter
FACTORY STEREO REMOVAL
2005-UP HONDA ODYSSEY
STEREO REMOVAL
1. Using a panel removal tool, carefully remove the panel surrounding the Ale controls and vents.
2. Remove (2) Phillips screws located below stereo.
3. Remove
(1) Phillips screw under the bottom rear center portion of the stereo.
4. Disconnect stereo and remove.
MOUNTING THE STEREO
DOUBLE ISO-DIN MOUNT
1. Attach 6593 &6594 mounting brackets to 6592 mounting panel using supplied screws
2. Align position and bolt the aftermarket Double Din head unit to the mounting brackets. Use hardware
supplied with aftermarket stereo
to secure the mounting brackets to the stereo.
Note: If hardware is not supplied with aftermarket stereo
use hardware from factory stereo.
REAR SUPPORT
BRACKETS
6594 LEFT MOUNTING
'" BRACKET ~
....................
6592
MOUNTING
PANEL
2
.. ....
.... ~
6593 RIGHT ". ~
MOUNTNG BRACKET
NOTE:
REAR SUPPORTING THE STEREO
ADDS TO THE INSTALLATION'S
STRUCTURAL INTEGRITY. REAR
SUPPORT AVAILABLE SEPARATELY.