Owner's Manual

HA1707DGB/HA1707ETB
DASH
REPLACEMENT
KIT
FOR
2008
HONDA
ACCORD
NON-DUAL
CLIMATE
CONTROL
MODELS
6482
MOUNTING
PANEL
6523
POCKET
6522
BRACKET
(RIGHT)
INTRODUCTION I PRELIMINARY
This premium installation kit is for 2008 Honda Accord vehicles. Included are all the parts you need
to
mount
your car stereo or CD player into your vehicle's dash. Refer to the individual instruction
in
this manual
to
remove your vehicle's factory radio and assemble the kit.
CAUTION
Disconnect your vehicle's negative battery terminal before the installation
to
help prevent electrical damage.
We recommend the use
of
a volt/ohm meter over a test light
to
check wiring. A test light
or
grounded wire
probe can cause damage
to
the vehicle's computer and/or diagnostic systems. Avoid all factory airbag wiring
- airbags can accidentally deploy causing serious injury
or
death.
NOTES
See your vehicle's instructions for any special tools your installation might require.
Read all instructions accompanying your car stereo for proper wiring and mounting instructions.
FACTORY WIRING
CODES
For
Factory
Wiring
Codes
go
to:
WWW.scosche-cars.com
CAR
STEREO
CONNECTORS
PROVIDE
EASY
CONNECTION
OF
YOUR
CAR
STEREO
TO
FACTORY
WIRING
HARNESS.
HA11
HAAS
2008-Up Honda 2006-Up Honda
Antenna Adapter
HA11
NO PHOTO
AVAILABLE
LIABILITY DISCLAIMER
This instruction booklet is based on carefully documented data and research
of
automobile dash disassembly, wire harness/
codes and information pertaining
to
installation
of
this kit (HA1707DGB/ETB) in 2008 Honda
Accord
vehicles. Scosche
Industries, Inc. can not be held responsible for discrepancies/inconsistencies that may occur due to the automobile
manufacturing changes
or
options, or damage that may
occur
in
the automobile during the installation
of
components
while using this booklet.
If you have any further questions, call
our
toll free technical help line at:
1-800-621-3695x3
©2008 SCOSCHE INDUSTRIES, INC.
SI
1/08 - HA1707DGB/HA1707ETB (3000003)

Summary of content (5 pages)