Owner's Manual

INSTALLATION GUIDE Kit Disassembly
Harley Davidson Street Glide, Electra Glide and Ultra
Limited models 2014-UP DISASSEMBLY
Step 1
Disassembly
Disconnect battery to prevent any short circuit to the motorcycle's
electronics.
Step 2
D isasse m bly
Carefully remove the (3) screws
securing the windshield to the fairing
and remove wind shield.
Tip: Completely remove (2) outer
screws and loosen the center one
giving the windshield enough room to
be wiggled out; third center screw
removal continue on step 4.
Step 3
D isassem b ly
Remove the (4) screws on the
outer fairing.
Location: One screws on top
and one bolt on the bottom of
both sides of the fairing for a
total of 4.
Step 4
Disassembly
Step 2 CONTINUED
Remove the loosened center bolt
from step three then carefully
remove and unplug the outer
fairing away from the motorcycle.
©2 01 6 SCOSC HE INDUS TR IES I NC .
2
Loosen
HD 7 001 B 04/17