Owner's Manual

FACTORY
STEREO
REMOVAL
2012
HYUNDAI
ACCENT
1. Use a panel removal tool
to
unclip
the stereo
bezel,
disconnect and remove.
2.
Extract
(4)
Phillips
head screws securing the stereo,
unplug
and remove.
MOUNTING
THE
STEREO
SINGLE DIN
MOUNT
1.
Attach
6761
pocket
to
7236
&
7237 brackets using
supplied
screws.
2.
Align
and attach 7236 & 7237 brackets
to
aftermarket
single
din stereo using screws
supplied
with the stereo.
Note:
If
hardware is not
supplied
with aftermarket
stereo reuse hardware from factory stereo.
3.
Reconnect stereo and
slide
into dash.
4.
Place
7235
panel over
stereo/bracket/pocket
assembly. Secure
7235
panel and
stereo/bracket/pocket
assembly
using
(4)
Phillips
head screws
removed during
disassembly.
Finish
reassembly.
DOUBLE DIN
MOUNT
7235
PANEL
1 .
Align
and attach 7236 and 7237 brackets
to
aftermarket
double
din stereo using screws supplied
with the stereo.
Note:
If
hardware is not
supplied
with aftermarket
stereo reuse hardware from factory stereo.
2.
Reconnect stereo and
slide
into dash.
3.
Place
7235
panel
over stereo/bracket
assembly. Secure
7235
panel
and stereo/bracket
assembly
using
(4)
Phillips
head screws
removed during
disassembly.
Finish
reassembly.
7238
RIGHT
,
~
BRACKET
'
~
:.
............
,
~
'
~,
'
~
7236
RIGHT
BRACKET
VARIOUS REAR
SUPPORTS
NOTE:
REAR
SUPPORT AVAILABLE
SEPARATELY. REAR
SUPPORT OF
THE
STEREO ADDS TO
THE
INSTALLATION'S
STRUCTURAL
INTEGRITY.
2