Owner's Manual

INSTALLATION GUIDE RAD/00/SASSEMB LY
STIP ' RADIO DISASSEMBLY
Remove the four screws securing the OEM panel to
the dash; then unplug and remove the panel (see
image on the right) .
ITIP 6 RADIO DISASSEMBLY
Remove the OEM display and the CD receiver by
unscrewing t he four screws for each component (8
screws total, circled) . Next, unplug all wiring and
remove (see image on the left) .
INSTALLATION GUIDE Dash Modification
CAUTION: Major modification required for double DIN Installation, proceed with caution.
STEP 7 Dash Modification
Carefully cut and remove the highlighted
dashed area on the sub - dash frame to create
space for the double DIN radio .
File down the slight ridge areas highlighted
and noted on the image locate on the ri ght.
NOTE: Only file down necessary amount to
give the UAC a flush fit.
©2 021 SCOSC HE IN DU ST RI ES, IN C.
3
ITCFD0SAB 1 0/21