Owner's Manual

INSTALLATION GUIDE Panel Preparation
SJJP 16 Panel Preparation
Place the back cover plate over the PCB and secure it
using six screws retained in disassembly.
NOTE: Use the screws attained from the OEM PCB
cover plate.
INSTALLATION GUIDE Radiotnstallation
STEP 17 Radio Installation
Single DIN Only
... "'>. ©
.:, '-:::
~~«>-
.. ' ,,: ,
Attach brackets provided to the pocket (A), "
then secure the rad io to the brac . kets (B) . Lastly,
secure radio assembly into dash cavity (C) and
proceed to the next step .
STEP 18 Radio Installation
Connect and reassemble ev -
erything in reverse order of the
disassembly to complete the
installation .
NOTE: 12V / Cigarette plug is
retained from the OEM panel.
©2021 SCOSC HE INDU STR I ES, IN C.
,,/
Double DIN Only
Attach provided bra c kets to then secure th e a f-
termarket radio (D). Next, s ecure radio assembly
into the dash cavity (E) then proceed to the nex t
step .
Single DIN
6
Single DIN
I TCFD0SAB 10/ 21