Owner's Manual
scosCl-le~
LOC-SO
CAR
STEREO
SPEAKER
LEVEL
CONVERTER
Thank you
for
purchasing the
LOC-BO
Speaker Level Converter from Scosche
Industries, Inc. The
LOC-BO
is a non-electronic device
that
allows any stereo
to
be
connected
to
an amplifier/EO booster. This is accomplished
by
converting the speaker
high level
outputs
of
any stereo into
low
level RCA
jacks
by
electronically converting
the signal as
it
passed through
the
LOC-BO.
Use the
LOC-BO
whenever you wish
to
add
an
amplifier
or
EO
booster
to
a stereo
that
is
not equipped with RCA (low-level) outputs. By simply connecting the speaker inputs
of
the
LOC-BO
to
the speaker
outputs
of
your radio, you can
now
add
any amplifier
or
EO
booster
to
your
car
audio system.
'(See
Illustration
A).
ILLUSTRATION A:
AMPLIFIER~
~
.----...............
<=!LID
QIOP
rL-,.~r:4!~
~
RCA EXTENSION
CABLE REQUIRED
REO-
RIGHT
WHITE-LEFT
REFER TO RADIO OWNER'S MANUAL FOR DETAILS ON RADIO WIRING
RADIOI
STEREO
DIRECTIONS
-
HELPFUL
HINTS
• The wiring colors
of
the
LOC-BO
may be different from the wiring colors found on
your
stereo.
• Consult
your
stereo owner's manual
to
determine
the
correct
wire functions.
• Always
work
in an area with ample lighting.
• For helpful hints on connecting wires, see the section entitled "Professional Wiring
Tips".
CONNECTING
THE
LOC-SO
TO
YOUR
RADIO:
1)
Connect the left (+) speaker wire
of
your
stereo
to
the white wire
of
the
LOC-BO.
Connect the left
(-)
speaker wire
to
the white/black wire
of
the
LOC-BO.
Connect the
right
(+) speaker wire
to
the gray wire
of
the
LOC-BO.
Connect the right
(-)
speaker
wire
to
the
gray/black
wire
of
the LOC-80. (See Illustration A.)
2)
Connect the RCA
output
jacks
of
the
LOC-BO
to
the RCA inputs
of
your
amplifier/EO
booster. Red
= Right, White = Left.
3)
Check all connections and
test
the sound system.
If you have any further questions, call:
© 2005 SCOSCHE INDUSTRIES, INC.
TECH HELP: 1-800-621-3695 ext. 3
81
7/05 -
LOC-BO
(300LOCBO)