Owner's Manual
Table Of Contents
B
.SCD£J;C'IE
.
1998-05 LEXUS GS300/430
AMP BYPASS HARNESS
(NON-MARK LEVINSON}
APPLICATION
GUIDE
• 1998-05 GS300 I 430
INSTALLATION
GUIDE
LS02B
1. Open and lower glove compartment fully by pushing in stop tabs.
2.
Locate the factory amplifier behi
nd
and to
th
e right
of
glove box (upper
passenger foot well)
3.
Unplug the white connector set 1 0-pin I 6-pin
(a
mp output to speakers)
4. Connect the LS028 harnesses and carefully route the loom over the glove
compartment and back to stereo location.
5. Connect aftermarket speaker/power wiring to the LS028 harnesses following
EIA color codes. Notes: Fly out leads require manual connection
at
dash:
+12V Accessory, Illumination and Power Antenna.
LIABILITY
DISCLAIMER
This LS02B in
st
ruction manual is based
on
carefully
doc
um
ented data
an
d research. Scosche Industries I
nc
.
cannot
be
held responsible for discrepancies/inconsistencies th
at
may
occur
due
to the vehicle manufacturing
changes or
op
tions, or damages that may occur in the vehicle
dur
i
ng
t
he
installation
of
compo
nen
ts
while
using this
ma
n
ua
l.
If y
ou
have any further
qu
estions, call our toll-free technical help line at:
© 2016 SCOSCHE INDUSTRIES, INC.
1-80
0
-62
1-
3695
x3
LS02B
05
/16