Owner's Manual

BASE-CLAMPS
HOW IT WORKS:
STEP 1
Select the right size clamp
(Various sizes sold
separately)
STEP 2
Select the base & ring
c
lamp that coinc i des wi th
what you need to mount
2A . Use protective film to
prevent any pa i nt
damage 28 .
STEP3
Lock it in place
The self locki ng clamp design
allows for easy for easy one
person installatio
n. Simply slip the
clamp over tube and lock in your
base, secure using the stainless
mounting hardware and you are
ready
to Mount Up and Move Out.
NOTE: Ring clamps 2" & over in size may
require pre-stretching
to help spread the
clamp over the tube . (Use Protective film
when mounting)
For complete warranty details, please visit us at
www.scosche.com or call [phone]
Register your product online at
www.scosche.com/register
PSM31001
CAMERA I GoPro ® MOUNT BASE
PARTS INCLUDED
(1) Camera Base Adjustment Mount
(1) 1 /4" -20 Screw Mou nt
(1) Go Pro
111
Mount
TOOLS REQUIRED (Not Included)
3/ 1 6" Hex (Allen) Key, E xcept where noted
+---*Ring Clamps
NOT I ncluded
*VARIOUS RING CLAMP SI ZES SO LD SEPAR AT ELY W/ HARDWAR E
PSC21006 - BaseCiamp 1.5" Tube Clamp
PSC21007
- BaseCiamp 1.625" Tube Clamp
PSC21009
- BaseCiamp 1. 75" Tube Clamp
PSC210010- BaseCiamp 1.85" Tube Clamp
PSC210011
- BaseCiamp 1.875" Tube Clamp
PSC21012
- BaseCiamp 2" Tube Clamp