Owner's Manual

USING THE ARMBAND MONITOR
RECORD A WORKOUT
• Press and hold the Record button for 2 seconds.
- Tri-LED's will blink continuously*
• Press and hold the Record button for 2 seconds
to
stop recording.
- Tri-LED's will blink 3 times.
*Note: The number of LED's blinking indicates
remaining capacity.
- 3 LED's: 66% - 100%
- 2 LED's: 33% - 66%
- 1
LED: 0% - 33%
• Clear all memory
- Press and hold MFB & Record button simultaneously
for 1 0 seconds.*
*Note: Upload data before deleting from Rhythm 24.
CARE INSTRUCTIONS
• To ensure accurate readings, clean the sensor lens
with a soft cloth.
• Use a soft cloth with ONLY mild hand soap and cool
water
to wipe down the armband, sensors and
plastic housing.
• Use a cotton swab and ONLY rubbing alcohol
to clean
the charging contacts.
• Do not use any abrasive chemicals to clean the
Rhythm 24 Armband, sensors or plastic housing. This
will cause permanent damage.
For complete warranty details, please visit us
at
www.scosche.com or call [phone]
7