Owner's Manual

RAV4 BRACKET INSTALLATION
1, The bracket is only used for
installation in Toyota RAV4.
2. Align the snaps of RAV4 mounting
bracket with the pocket slots.
3. When aligned, snap bracket
carefully into position until locked.
BACK VIEW
OF POCKET
STRUCTURAL INTEGRITY.
2000.UP TOYOTA MR2 SPYDER
RADIO REMOVAL AND IN-DASH INSTALLATION:
Note: The factory radio provision is for a Double ISO/DIN style radio.
1. Use panel removal tool to remove left and right plastic side panels, extract (1) Phillips screw from
behind each panel.
2. Remove climate control knobs, and extract (2) Phillips screws.
3. Remove radio trim bezel.
4. Remove ash tray and extract (1) IOmm bolt on the right side, carefully pry out ash tray trim bezel,
disconnect and remove.
5. Extract (4) Phillips screws securing radio, disconnect and remove from dash.
USE
THESE
TABS
USE
EFsE
I
VIE THE SHADED MOUNTINQ TABS. CUT OFF THE REMAININQ TABS AND DISCARD.
I
R