Owner's Manual
Table Of Contents
VEHICLE
DISASSEMBLY
1.
Unscrew shifter handle and remove.
2.
Using a panel removal tool, remove shifter trim panel.
3.
Using a panel removal tool, remove trim panels
on
each side of the storage pocket
below the
HVAC
controls. Extract
(1)
Phillips screw underneath each trim panel.
4.
Using a panel removal tool, remove entire top portiion of the center console
in
front of
the arm rest. Disconnect and remove.
5.
Using a panel removal tool, remove upper AlC vents above the radio.
6.
Extract (4) 10mm bolts (2 above and 2 below the radio) securing the radio and HVAC
controls to the dash. Disconnect and remove.
MOUNTING THE POCKET
1.
Align and position the 6128 pocket to the lower radio opening
of
the 6127 panel. The
6128 pocket face should rest flush with the 6127 panel face.
2.
Use the (3) screws supplied with the installation
kit
to secure on the 6128 pocket to the
6127 panel.
2