Owner's Manual

FACTORY STEREO REMOVAL
2010 TOYOTA PRIUS
1. With a panel removal tool (PRT), unclip panel surrounding shift~r and slide down. Note: Do not disconnect.
2. With
PAT, unclip center console panel.
3. With
PAT, unclip panel surrounding radio, unplug &remove.
4. With
PAT, unclip powerlvehicle start panel. Note: Do not unplug.
5. Extract (4) 10mm screws securing radio, unplug &remove.
MOUNTING THE STEREO
SINGLE DIN MOUNT
1. Attach the 6552 pocket to the 6861 mounting panel
using the screws provided with the kit.
2. Attach the 6862 and 6863 brackets
to the 6861
mounting panel using the screws provided with the kit.
3. Align and attach the single din stereo to the brackets
using the screws supplied with the stereo.
NOTE: IF HARDWARE
IS NOT SUPPLIED WITH
AFTERMARKET STEREO
USE HARDWARE FROM
FACTORY STEREO.
KIT ASSEMBLY
NOTE: IF HARDWARE
IS NOT SUPPLIED WITH
AFTERMARKET STEREO
USE HARDWARE FROM
FACTORY STEREO.
KIT ASSEMBLY
DOUBLE DIN MOUNT
1. Attach the 6862 and 6863 brackets to the 6861 mounting panel
using the screws provided with the kit.
2. Align and attach the double din stereo to the brackets
using the screws supplied with the stereo.
2