Owner's Manual
FACTORY
STEREO
REMOVAL
2010
TOYOTA 4RUNNER
1 . With a panel removal tool
(PRT),
unclip side panels located
to
the right and left side
of
the A/C controls and remove.
2.
With
PRT,
unclip A/C controls panel, unplug and remove.
3.
Extract
(4)
1
Omm
screws securing stereo panel then,
with
PRT,
unclip stereo panel, unplug and remove.
4.
Extract
(2)
screws securing
top
plate
to
factory panel
(see Figure 1
).
Retain
top
plate for dash reassembly.
5.
Extract
(4)
screws securing the left and right A/C vent
directional control plates
to
the panel (see Figure 1
).
Retain both left and right A/C directional control
plates for dash reassembly.
6.
Unsnap hazard switch from factory panel,
and retain for dash· reassembly.
7.
Unsnap and remove factory A/C vents
from factory panel, and retain for dash reassembly.
'
MOUNTING
THE
STEREO
FACTORY PARTS
AND
PANEL ASSEMBLY
FIGURE 1
FACTORY PANEL
TOP PLATE
1 . Secure factory
top
plate
to
panel 6983 with
(2)
screws removed during disassembly.
2.
Secure both left and right factory A/C vent directional control plates
to
panel6983 with
(4)
screws removed during dash disassembly.
3.
Snap factory hazard switch and factory A/C vents into panel 6983.
SINGLE DIN
MOUNT
NOTE: IF HARDWARE
IS NOT SUPPLIED WITH
AFTERMARKET STEREO
USE HARDWARE FROM
1.
Attach 6552 pocket
to
6983 panel using screws supplied with kit (see Figure
2).
FACTORY STEREO.
2.
Attach 6985 and 6986 brackets
to
6983 panel using supplied screws.
3.
Align and attach aftermarket single din stereo
to
brackets using the screws supplied with the
stereo. Reconnect and finish reassembly.
FIGURE 2
6983
MOUNTING
PANEL
DOUBLE
DIN
MOUNT
6552
POCKET
6986
LEFT
MOUNTING
BRACKET
1 . Attach 6985 and 6986 brackets
to
6983 panel using supplied screws.
2.
Align and attach aftermarket double din stereo
to
brackets using the
screws supplied with the stereo. Reconnect and finish reassembly.
NOTE:
IF HARDWARE
IS NOT SUPPLIED
WITH AFTERMARKET
STEREO USE
HARDWARE FROM
FACTORY STEREO.
6986
LEFT
MOUNTING
BRACKET
2
'V
6985
RIGHT
MOUNTING
BRACKET
6985
RIGHT
MOUNTING
BRACKET
VARIOUS
REAR
SUPPORTS
·
··-v
NOTE: REAR SUPPORT
AV~LABLESEPARATEL~
REAR SUPPORT OF THE
STEREO ADDS TO THE
INSTALLATION'S
STRUCTURAL INTEGRITY.