Owner's Manual

MAGIC PLATETM MOUNTING OPTION 1
NOTE : For mounting directly to device, use the large single plate with template guide as
shown in the instructions below
!move ~
4
the white ' ---....___ J
paper backing ~
from both plates ~
REMOVING THE PLATE
Use a thin plastic card to carefully lift the
plate's adhesive surface from the mounting
surface. Slowly lift up and remove the plate.
Do not use any heat or liquids to
remove the plate, due to risk of
damaging your phone. Contact Scosche
Customer Service for any additional
assistance at 800.363.4490 Ext. 1 or
[e-mail]
MAGICPLATE ™ MOUNTING OPTION 2
8
(
Line up the
corresponding
arrows on the
Template Guide to the
'
to the bottom of your phone.
When
positioned, press
plates firmly to __-
affix and ~
remove
template.
NOTE: For mounting directly to CASE, use the (2) small plates with the integrated
template guide as shown below.
8
0
Lastley,
remove the
template guide. ,.
, _,,
REMOVING THE METAL PLATE
Use a thin plastic card to carefully lift the plate's adhesive
surface from the mounting surface. Slowly lift up and remove
, e> "
the plate. Do not use any heat or liquids to remove the plate, due to risk of
damaging your phone. Contact Scosche Customer Service for any additional
assistance at 800.363.4490 Ext. 1 or [e-mail]
2