Owner's Manual

Modification Required: Please read complete instructions before
proceeding. Location modification required for this installation, proceed
with caution. If you are unsure or feel that the installation is to difficult, we
recommend you seek professional installation. Note that additional
installation fees may apply and vary by location. Scosche is not responsible
or liable for any additional fees or modification done by the installer.
Caution! Before beginning the disassembly make sure of the following:
• Negative battery terminal is disconnected.
• Parking brake is ON.
VEHICLE DISASSEMBLY
1. Open the center armrest center
console to gain access to the
following step.
2. Use a panel removal tool to
carefully remove the shifter/cup
holder panel over the shifter
(illustration 2). Once panel is
removed carefully set aside for
preparation steps.
3. Disconnect the vehicle's 12V
power harness by reaching into
the cavity under the armrest
center console, see illustration.
0)------
I
I •
4