(3M) Calculator User Manual

-brat
Set the maximum load imbalance ratio to rat, which should be a value
comprised between 0 and 1. This option can be used in co njunction with
option -c, but is incompatible with option -m.
-cflags
Tune the default mapping strategy according to the given preference
flags. Some of these flags ar e antagonistic, while o thers can be combined.
See Section 7.3.1 for mor e information. The currently available flags are
the following.
b Enforce load balance as much as possible.
q Privilege quality over speed. This is the default behavior.
s Privilege sp e ed over quality.
t Use only safe methods in the strategy.
This option can be used in conjunction with optio n -b, but is incompat-
ible with option -m. The resulting strategy string can be displayed by
means of the -vs option.
-h Display the program synopsis.
-mstrat
Apply mapping strategy strat. The format of mapping strategies is de-
fined in section 7.3.2. This option is incompatible with options -b and
-c.
-sobj
Mask source edge and vertex weights. This option allows the user to “un-
weight” weig hted source graphs by r emoving weights from edges and ver-
tices at loading time. obj may contain several of the following switches.
e Remove edge weights, if any.
v Remove vertex weights, if any.
-V Print the program version and copyright.
-vverb
Set verbose mode to verb, which may contain several of the following
switches. For a detailed description of the data displayed, pleas e refer to
the manual page of gmtst below.
m Ma pping information.
s Strategy information. This parameter displays the mapping strategy
which will be used by gmap.
t Timing information.
-V Print the program version and copyright.
6.3.7 gmk
*
Synopsis
gmk hy dim [output graph file] options
gmk
m2 dimX [dimY [output graph file]] options
gmk
m3 dimX [dimY [dimZ [output graph file]]] options
gmk
ub2 dim [output graph file] options
35