SDS

Scotchgard(TM) Fabric Water Shield 4016-PF
01/27/20
__________________________________________________________________________________________
Page
6
of 15
Indirect Vented Goggles
Skin/hand protection
Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the
results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing.
Gloves made from the following material(s) are recommended: Nitrile Rubber
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapors
Organic vapor respirators may have short service life.
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
Physical state
Color
Liquid : Aerosol
Colorless
Specific Physical Form: Aerosol
Odor Faint Petroleum, Faint Hydrocarbon
Odor threshold No Data Available
pH Not Applicable
Melting point Not Applicable
Boiling Point 174 ºC
Flash Point 103 ºF [Test Method:Closed Cup] [Details:Liquid only;
propellent flash point <0 F]
Evaporation rate No Data Available
Flammability (solid, gas) Not Applicable
Flammable Limits(LEL) 0.8 %
Flammable Limits(UEL) 6 %
Vapor Pressure 1.1 mmHg [@ 68 ºF]
Vapor Density 4.8 [Ref Std:AIR=1] [Details:Conditions: for CAS 64742-47-8]