Service Manual
Water and Drain
The ice making section requires an adequate
potable water supply and a gravity drain.
In some tight situations it will be necessary to
assemble the ice making section to the dispenser
or bin and install the water and drain connections
before placing the system in its installed position. A
loop of water supply tubing will allow movement of
the system.
In other tight situations the unit should have its
water and drain tubing connected and stubbed out
before placing on the dispenser or bin.
Prodigy Eclipseรค 1200, 1400, 1800, 2000
August 2008
Page 19
Drain
Fitting
Water
Inlet
Refrigeration
Connections