Service Manual

Options
Advanced Feature Board, kit #KSB
When this option is present there is an additional
display panel in the area below the main control
board. It is not visible when the front panel is on.
The Smart-Board’s features include:
·
Seven day programmable ice level setting when
used with the optional Ultrasonic ice level
control
·
Recording of machine operation, including cycle
time.
·
Calculation of average cycle time
·
Recall of malfunctions with the time they
occurred.
Ice
The cuber drops ice in large sections. That ice will
break up into random parts as it falls into the bin,
but some large sections may remain on top of the
ice in the bin. When removing ice, tap the groups
of ice with an ice scoop to separate them into
smaller units. In a dispenser, this ice will break up
into mostly individual cubes as the dispense
mechanism moves the ice.
The ice in the bin will slope down from the right to
the left. This is normal.
Noise
The ice machine will make little noise when it is in
ice making mode. The compressor and fan motor
are remote from the ice making head. The water
pump in the ice making head will produce some
sound. It is also normal to hear some cracking just
before the harvest cycle begins. In addition, during
the harvest cycle the harvest assist solenoid will
click twice as it pushes the ice out and returns to
its normal position. The ice harvests as a unit or
slab, which makes some noise when it impacts the
bin or dispenser. These noises are all normal for
this machine.
Prodigy Eclipseä 1200, 1400, 1800, 2000
August 2008
Page 31
SmartBoard Advanced Feature Control™
See Instructions for Available Features
34
SEL
02-4293-01 Rev A.
ENTER
ESC